CBR15 Loudspeakers
The CBR15 provides the lowest frequency in its lineup, delivering outstanding performance for the front-of-house sound for live performance, DJ events or for installation situations that require highly prominent low and high SPL.
USB Audio Interface c/w Cubase AI (2 analog i/p & 1 analog o/p)
USB 3.0 Audio Interface (2 analog i/p, 2 analog o/p & MIDI i/o) c/w Cubase AI & Cubasis LE for iPad
UR22C c/w ST-M01 studio microphone, ST-H01 studio headphones, Cubase AI, WaveLab LE and Cubasis LE.
USB Audio & MIDI Interface c/w switchable 2 x RND Transformers (4 analog i/p & 2 analog o/p)
- 2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter
- 54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response
- 45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
- Packaging single
- 2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter
- 54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response
- 45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
- Packaging single
- 2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter
- 54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response
- 45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
- Packaging single
- 2-way bass-reflex bi-amplified nearfield studio monitor with 5" cone woofer and 1" dome tweeter
- 54Hz - 30kHz (-10dB), 74Hz - 24kHz (-3dB) frequency response
- 45W LF plus 25W HF bi-amp system for high-performance 70W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
- Packaging single
- 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter
- 43Hz - 30kHz (-10dB), 55Hz - 24kHz (-3dB) frequency response
- 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
- Packaging single
- 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter
- 43Hz - 30kHz (-10dB), 55Hz - 24kHz (-3dB) frequency response
- 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification
- ROOM CONTROL and HIGH TRIM response controls
- XLR and TRS phone jack inputs accept balanced or unbalanced signals
- Packaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter. 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter 43Hz - 30kHz (-10dB), 55Hz - 24kHz (-3dB) frequency response 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Packaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter. 2-way bass-reflex bi-amplified nearfield studio monitor with 6.5" cone woofer and 1" dome tweeter 43Hz - 30kHz (-10dB), 55Hz - 24kHz (-3dB) frequency response 60W LF plus 35W HF bi-amp system for high-performance 95W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Packaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter. 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter 38Hz - 30kHz (-10dB), 47Hz - 24kHz (-3dB) frequency response 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Packaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter. 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter 38Hz - 30kHz (-10dB), 47Hz - 24kHz (-3dB) frequency response 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Packaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter. 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter 38Hz - 30kHz (-10dB), 47Hz - 24kHz (-3dB) frequency response 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Packaging single
2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter. 2-way bass-reflex bi-amplified nearfield studio monitor with 8" cone woofer and 1" dome tweeter 38Hz - 30kHz (-10dB), 47Hz - 24kHz (-3dB) frequency response 75W LF plus 45W HF bi-amp system for high-performance 120W power amplification ROOM CONTROL and HIGH TRIM response controls XLR and TRS phone jack inputs accept balanced or unbalanced signals Packaging single
- Type: 2-way, Bi-amp powered speaker, Bass-reflex type:
- Frequency range (-10dB): 55Hz - 20kHz
- Nominal coverage, H: 90, V: 60
- Components: Diameter:10" cone, Voice Coil:2", Magnet:Ferrite
- HF: Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite
- Crossover: 2.1kHz: FIR-X tuning (linear phase FIR filter)
- Output power: Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
- Maximum output level (1m; on axis): 131dB SPL
- I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
- Heat dissipation: Fan cooling, 4 speeds
- Power requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
- Power consumption: 74W(1/8 Power Consumption), 18W(Idle)
- Cabinet material: Plastic
- Finish: Black
- Handle: Side x 2
- Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
- Pole socket: 35mm (Bottom x 1)
- Dimensions: 308mm (12.1")
- H: 493mm (19.4")
- D: 289mm (11.4")
- Net weight: 10.5 kg (23.2 lbs)
- Type: 2-way, Bi-amp powered speaker, Bass-reflex type:
- Frequency range (-10dB): 55Hz - 20kHz
- Nominal coverage, H: 90, V: 60
- Components: Diameter:10" cone, Voice Coil:2", Magnet:Ferrite
- HF: Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite
- Crossover: 2.1kHz: FIR-X tuning (linear phase FIR filter)
- Output power: Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
- Maximum output level (1m; on axis): 131dB SPL
- I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
- Heat dissipation: Fan cooling, 4 speeds
- Power requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
- Power consumption: 74W(1/8 Power Consumption), 18W(Idle)
- Cabinet material: Plastic
- Finish: Black
- Handle: Side x 2
- Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
- Pole socket: 35mm (Bottom x 1)
- Dimensions: 308mm (12.1")
- H: 493mm (19.4")
- D: 289mm (11.4")
- Net weight: 10.5 kg (23.2 lbs)
POWER TO PLAY
Wherever your music may take you, DBR Series loudspeakers are up to the task of delivering powerful, high-quality sound with an un-matched economy of transport and setup time. The most portable powered loudspeakers Yamaha has to offer, the versatile DBR Series harnesses the same state-of-the-art Yamaha DSP and amplifier and speaker technologies developed for the professional DSR Series and DXR Series lineups, ensuring high-resolution sound at any output level. Comprised of 10”, 12” and 15” models, each DBR loudseaker is housed in a newly designed, durable, lightweight cabinet optimized for FOH sound, floor-monitoring and even rigged applications. Whether you're powering your band’s live performance, DJ-ing a party, or MC-ing an event, be prepared for DBR Series speakers to take your performance to the next level.
- SPECIFICATIONSType: 2-way, Bi-amp powered speaker, Bass-reflex type:
- Frequency range (-10dB): 52Hz - 20kHz
- Nominal coverage, H: 90, V: 60
- Components: Diameter:12" cone, Voice Coil:2", Magnet:Ferrite
- HF: Diaphragm:1.4", Type: 1" throat compression driver, Magnet:Ferrite
- Crossover: 2.1kHz: FIR-X tuning (linear phase FIR filter)
- Output power: Dynamic:1000 W (LF: 800 W, HF: 200 W) / Continuous: 465 W (LF: 400 W, HF: 65 W)
- Maximum output level (1m; on axis): 131dB SPL
- I/O connectors: INPUT1: Combo x1, INPUT2: Combo x 1 + RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1+CH2 Mix)
- Processors: D-CONTOUR: FOH/MAIN, MONITOR, OFF
- Heat dissipation: Fan cooling, 4 speeds
- Power requirements: 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
- Power consumption: 74W(1/8 Power Consumption), 18W(Idle)
- Cabinet material: Plastic
- Finish: Black
- Handle: Side x 2
- Flying and mounting hardware: Bottom x 2, Rear x 1 (Fit for M8 x 15 mm eyebolts)
- Pole socket: 35mm (Bottom x 1)
- Dimensions: 376mm (14.8")
- H: 601mm (23.7")
- D: 348mm (13.7")
- Net weight: 15.8 kg (34.8 lbs)
- Speaker Type2-way, bi-amp powered speaker, bass-reflex typeFrequency Range50 Hz to 20 kHz (-10 dB)Nominal Coverage AngleH: 90°
- V: 60°ComponentsLF:
- 15" cone
- 2.5" Voice Coil
- Ferrite magnet
- HF:
- 1.4" diaphragm throat compression driver
- Ferrite magnetCrossover2.1 kHz: FIR-X tuning (linear phase FIR filter)Output PowerDynamic: 1000 W (LF: 800 W, HF: 200 W)
- Continuous: 465 W (LF: 400 W, HF: 65 W)Maximum Output Level132 dB SPLI/O ConnectorsInput 1: 1x combination XLR/TRS
- INPUT2: 1x combination XLR/TRS, 2x unbalanced RCA
- OUTPUT: 1x XLR3-32 (CH 1 Parallel Through or CH 1 + CH 2 Mix)ProcessorsD-Contour
- FOH/Main
- Monitor
- OffHeat DissipationFan cooling, 4 speedsPower Requirements100-120 VPower Consumption74 W (1/8 Power Consumption)
- 18 W (Idle)CabinetMaterial: PlasticHandle2x SideMounting Hardware2x bottom mounted, 1x rear mounted for M8 x 15 mm eyeboltsPole Socket1x 35 mm, bottomDimensions (W x H x D)17.9 x 27.6 x 14.9" (455 x 700 x 378 mm)Weight42.6 lb (19.3 kg)
- Speaker Type2-way, bi-amp powered speaker, bass-reflex typeFrequency Range50 Hz to 20 kHz (-10 dB)Nominal Coverage AngleH: 90°
- V: 60°ComponentsLF:
- 15" cone
- 2.5" Voice Coil
- Ferrite magnet
- HF:
- 1.4" diaphragm throat compression driver
- Ferrite magnetCrossover2.1 kHz: FIR-X tuning (linear phase FIR filter)Output PowerDynamic: 1000 W (LF: 800 W, HF: 200 W)
- Continuous: 465 W (LF: 400 W, HF: 65 W)Maximum Output Level132 dB SPLI/O ConnectorsInput 1: 1x combination XLR/TRS
- INPUT2: 1x combination XLR/TRS, 2x unbalanced RCA
- OUTPUT: 1x XLR3-32 (CH 1 Parallel Through or CH 1 + CH 2 Mix)ProcessorsD-Contour
- FOH/Main
- Monitor
- OffHeat DissipationFan cooling, 4 speedsPower Requirements100-120 VPower Consumption74 W (1/8 Power Consumption)
- 18 W (Idle)CabinetMaterial: PlasticHandle2x SideMounting Hardware2x bottom mounted, 1x rear mounted for M8 x 15 mm eyeboltsPole Socket1x 35 mm, bottomDimensions (W x H x D)17.9 x 27.6 x 14.9" (455 x 700 x 378 mm)Weight42.6 lb (19.3 kg)
2-way Beater
- Scrolls through Channels A,B,C, & D
- Self-powered though the locking cable